Rout and Return Dry

The flagship of quality engineering and design, the DRY system is a high performance panel system. Similar to unitized curtain wall design, the system is designed utilizing continuous double-gasketed interlocking perimeter extrusions with interior chambers used to control water infiltration. This design provides a “dry” wall cavity condition without the reliance of an air and water barrier. Any water that enters the system’s joinery is controlled and weeped back to the exterior. Tested to AAMA 501 standards, the DRY system has proven its performance time and time again.

Pressure Equalized Rainscreen

Designed using the rainscreen principle utilizing pressure equalization, the Pressure Equalized Rainscreen System (PER) incorporates concealed venting, allowing for rapid pressure equalization while preventing water infiltration. Tested to the AAMA 508 standards, the PER system provides a solid engineered option to the rainscreen question. Using the idea that less layout is better, the system attaches directly to the substructure through the continuous perimeter framing members. Additionally, the perimeter framing allows for simplistic compartmentalization.

Spline Rainscreen System

The SRS panel system is designed to utilize the Drained and Back Ventilated Rainscreen principal as tested to AAMA 509 standards, achieving a V3/W1 classification. Engineered with field versatility in mind, the Spline Rainscreen System incorporates a range of field attachment clips utilizing on-the-fly methodology allowing for quicker panel attachment with less layout. The system employs ACM joinery components, producing a low maintenance, caulk free, dry joint design while maintaining a fully functional engineered system. The flexibility of the spline design allows for a variety of design options.

Rout and Return Wet

When a wet joint (caulked) design is preferred, the WET system is the choice. Designed with continuous perimeter extrusions, the system allows for quick attachment to the substructure. No requirements for additional clip layout. The interlocking perimeter extrusions run along all sides of the panels, creating conditions for ideal panel-face registration alignment without expending additional field labor. As tested to AAMA 501 standards, the wet system provides a good barrier wall option to your design needs.

Swisspearl Concealed

The SPC system was designed to give the option of Swisspearl material with a concealed attachment design. We took the fundamentals of the Swisspearl exposed system and applied them with the twist of a concealed fastener attachment method. This produces a crisp, clean look with all the design characteristics of a Drained and Back Ventilated Rainscreen system. The Swisspearl’s fiber cement panel material is a high quality product designed for commercial applications. The absence of exposed fasteners produces an appearance enhancing its defining characteristics.

Swisspearl Legacy

As the original attachment system, the Swisspearl Legacy system (SPL) is designed to accommodate wall assemblies with cavity depth limitations. Featuring a 1″ cavity depth. the SPL system is the option for wall envelopes lacing the space to handle the depth of the newer generation of Swisspearl attachment systems. The vertically attached support extrusions maintain the cavity depth required for proper ventilation needed to function as a Drained and Back Ventilated Rainscreen. Swisspearl offers the widest range of homogeneously through colored composite cement materials. Available in 8mm and 12mm thickness to be used to suit design your ideas.

Trespa Exposed System

The ESC110 system is a face fastened Drained and Back Ventilated Rainscreen utilizing TRESPA high pressure laminate (HPL) material. TRESPA is a solid and sturdy material that is highly scratch and impact resistant with an intergraded decorative surface, cured with proprietary EBC technology producing a low maintenance finish that is easy to clean. The material is available in 8mm, 10mm and 13mm thicknesses and is mounted on a provided engineered grid system, utilizing aluminum extrusions. With the wide range of colors and fasteners available, the design choices are endless.

Trespa Concealed System

The ESC210 system is a Drained and Back Ventilated Rainscreen utilizing TRESPA high pressure laminate (HPL) material. TRESPA is a solid and sturdy material that is highly scratch and impact resistant with an intergraded decorative surface, cured with proprietary EBC technology producing a low maintenance finish that is easy to clean. The material is available in 10mm and 13mm thicknesses and is mounted on a provided engineered concealed grid system, utilizing aluminum extrusions and concealed fasteners. With the wide range of colors the design choices are endless.